These tubes are used for mains and buried connections, as well as for water supply, inside or outside buildings.
They are used for the transport of pressurized water at a temperature of 0 to 45 ° C
- Polyethylene tubes, used in the drinking water distribution network are smooth, black in color, with longitudinal blue marking bands.
- These tubes are delivered in crowns or on reels.
- The coiled length is 50 or 100 ml.
Drip irrigation is, by definition, an irrigation technology. However, during the last forty years, that is to say from the start of its diffusion throughout the world, at the beginning of the thirties it has also asserted itself as a global agro-technology, modifying modern agriculture.
MLPLAST provides farmers and irrigation professionals with products aimed at making the use of water profitable in agriculture, extreme resistance to ultra-violet rays and ease of installation.
MLPLAST's quality management system is based on the requirements of ISO 9001 version 2015.
-It includes the processes necessary to control and improve the efficiency of quality management:
-Continuous improvement of our performance by considering the results of risk assessment and strategic planning.
-The increase in customer satisfaction and anticipation of the needs and expectations of the parties displayed.
- The development of human potential through oriented training actions and specific qualification program.
A set of accessories adopted for the junction of PE pipes used for agriculture and water supply.
Drinking Water Distribution High density polyethylene pipes (PE80 or PE100) are delivered either in (5.8m, 6.0m, 11.8m or 12.0m or in 100m - 200m rings or in other lengths on request .
They are black in color and food grade.
Blue marker threads are distributed around the circumference of the tube.
See PE80 PEHD Pipe Brochures
Drinking Water Distribution High density polyethylene pipes (PE80 or PE100) are delivered either in (5.8m, 6.0m, 11.8m or 12.0m or in 100m - 200m rings or in other lengths on request. They are black in color and food grade.
Blue marker threads are distributed around the circumference of the tube.
See PE100 PEHD Pipe Brochures
These threads have a small thickness and a small width so as not to modify any of the physical and mechanical characteristics of the tube.
nominal pressures are defined for a temperature of 20 ° C, for service temperatures between 20 ° C and 45 ° C, applied to the maximum service pressure, the stamping coefficient corresponds to the service temperature See PEBD Pipe Brochures
-Precision of the water supply: the water is deposited with precision in a restricted volume of soil, corresponding to the configuration of the root system. Proper water management can minimize water and nutrient loss below the root zone.
- Elimination of water wastage on the periphery of the irrigated plot: thanks to the drip technique, the water does not spread beyond the limits of the irrigated plots as is the case in irrigation by sprinkling.
-Reduction of weeds: reduction of the watered area decreases the development of weeds.
-Balancing of the air-water ratio: the bulb moistened by drip irrigation usually contains more air than a soil watered by sprinkling or by submersion.
See PEBD Pipe Brochures
MLPLAST
your consultant supplier in fluid transfer solutions created in 2010 Mlplast manufactures solutions
for industrial
fluids, irrigation and drinking water transport, a material with many qualities
intrinsic:
RUE FOUNDOK CHOUCHA ROUTE SOUSSE KM 7 MEGRINE 2033 Ben Arous Tel : 71 432 450 Fax : 71 432 445 Mobile : 21 244 110 21 850 850
RUE FOUNDOK CHOUCHA ROUTE SOUSSE KM 7 MEGRINE 2033 Ben Arous Tel : 74 467 523 Mobile : 29 961 682
Proof has been furnished by means of an audit that the requirements of ISO 9001:2015 are met.
Customer Satisfaction
Technical
Trust
Communication
